{"product_id":"rfx-pro-ft-rear-brake-lever-black-blue-fxrb7050099bu","title":"RFX PRO FT Rear Brake Liver (Black\/Blue) FXRB7050099BU","description":"\u003cp\u003eRFX Pro Series Brake Pedal \n\u003cbr\u003e  \n\u003cbr\u003eRFX Pro Series Brake Pedals are Designed and Tested at the highest level. \n\u003cbr\u003e  \n\u003cbr\u003ePro Series Brake Pedals Are Manufactured From 7075-T6 Aluminum and Feature An oem Type Forged Shaft, A Smooth Finish on the Shaft Helps to Reduce the Wear Associated with a RIDGED Design. \n\u003cbr\u003e  \n\u003cbr\u003ePro Series Flexible Tips are CNC Machined Billet Aluminum and Feature a Spring Loaded Rotatable Tip Which under Impact Such As In a Rut will Spin to Reduce Damage. The tip also features steel teeth to help grip in muddy conditions. \n\u003cbr\u003e  \n\u003cbr\u003ePro Series flexible tips also incorporate a stop on the pivot tip, this stops the tip at 90 degrees of rotation prevening ladyage that can occur if the tip rotates under the clutch cover. \n\u003cbr\u003e  \n\u003cbr\u003ePro Series Brake Pedals Also Incorporate a Cable Brake Snake, This Helps Prevent The Pedal Shaft Being Bent Around in a Collision. \n\u003cbr\u003e  \n\u003cbr\u003eTag line: \n\u003cbr\u003eCNC FLEXIBLE TIP \n\u003cbr\u003eTo reduce impact damage \n\u003cbr\u003e  \n\u003cbr\u003eCold Forged Arm \n\u003cbr\u003eFor Improved Core Strength \n\u003cbr\u003eFeatures: \n\u003cbr\u003e   Made from 7075 Aerospace Aluminum Construction. T6 Heat Treated to Increase Tensile Strength. Forged Shaft for Increased Core Strength. Smooth Shaft Design to Reduce Surface Wear. CNC Machined Billet Flexible Tip. Rotating Action Reduces Impact Damage. Steel Insert Teeth for Increased Grip. Mechanical Stop on the tip. Incorporated Brake Snake. Color Anodised to Prevent Corrosion. Laser Etched Logo.  \n\u003cbr\u003e  \n\u003cbr\u003e  \n\u003cbr\u003eFITTING INSTRUCTIONS: \n\u003cbr\u003e   Start by Taking Note Mark Where the Height If The Pedal Tip is in Relation to the Footpeg. Remove the r-clip or split pin from the rear of the brake bolt located behind the fram. Remove The Pivot Bolt Holding the Pedal to the Frame. Detach The Return Spring From The Pedal and Leave Hanging.  Spin The Pedal Outwards Exposing the Split Pin at the rear of the pedal clevis. Remove This Split Pin and the Locating Dowel, The Rear Brake Pedal Will Now Remove. Remove The Oil Seals from the Old Pedal Clean and Re-Fit to the New Pedal. Clean all the parts with a multi-purpose lube such as maxima mppl, ready for re-installing. Re- Fit The Brake Clevis, Locating Pin and Split Pin. Re-fit the return run. Apply Some Maxima Waterproof Grease to the Pivot Bolt Align the Pivot Hole and Re-Fit The Bolt. Torque the Pivot Bolt to the Required Torque As Per The Owner's Manual. Re-fit the R-Clip\/Split Pin to the rear of the pivot bolt. With the Pedal Now Attached Adjust The Pedal Height to the Corract Position and Free Play, Do This By Loosing The Nut Above The Clevis and Turning The Plunger Bolt Inwards or Outwards to Suit. Now Fit The Brake Snake. Japanese Models-Remove The Lower Engine Mount Nut and Washer, Replace the Old Washer with the New Washer which is attached to the brake snake. KTM Models-Remove the New Washer which is attached to the brake snake, put this aside as a not required on the ktm, loop the cable around the lower engine mount and replace inside the crimp fitting.  Set The Correct Tension on the Brake Snake, Remembing to Allow for the Pedal to Extend Down.  Crimp The Fitting Together Using Pliers and Trim Excess Cable.  Color: Black \u0026 Blue Material: Aluminum\u003c\/p\u003e","brand":"RFX","offers":[{"title":"Default Title","offer_id":50789666292049,"sku":"1110872001","price":94.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/8256\/0849\/files\/800Wx800H-1110872001-1.jpg?v=1742460611","url":"https:\/\/gregmoto.at\/en\/products\/rfx-pro-ft-rear-brake-liver-black-blue-fxrb7050099bu","provider":"Greg Moto ","version":"1.0","type":"link"}